Purpose: To prepare a viscous solution of aqueous compounds dissolved in water using Skittles candy, removing as much of the non-aqueous constituents as possible. The intended use of the product is yielding a flavored syrup, for use in beverages.
Materials:
200g Skittles (one flavor)
1 1000mL beaker
1 2000mL separation funnel (pyrex or borosilicate) and ring stand
1 100 mm stemmed glass funnel
1 glass stir rod
1-2 pieces of qualitative filter paper (any size that will fit in funnel)
1 serving vessel of choice ~150-175mL
Procedure:
1. Separate out the 5 different candy flavors in mixing bowls, choosing one flavor per iteration.
2. Add 200g Skittles (approximately 190 candies) and 400mL (approx 1.75 cups) of water in large or medium saucepan.
3. Heat to boiling, stirring to completely dissolve Skittles.
4. Add mixture to separation funnel, leaving room for non-polar layer
5. Add 240mL (1 cup) of heated canola oil to mixture to serve as extraction layer.
6. Using heat protective mitts tilt sep funnel gently 180 degrees, holding the stopper firmly, be careful not to cause an emulsion by introducing turbulence to the mixture. We want it to separate cleanly and evenly.
7. Place sep funnel on ring stand and let stand until layers form (5 min).
8. Take off stopper, and drain aqueous layer into 1000mL beaker to keep. Discard non-polar layer.
9. Repeat if there are any white solids in the mixture.
10. Put a stemmed glass funnel in the top of the sep funnel and fit some wet qualitative filter paper.
11. Pour mixture through filter paper and drain filtered soln into 1000mL beaker.
12. If you have a gas range, you can heat the mixture right in the beaker on medium heat, stirring until the level reaches approximately 150mL.
This is your finished solution, and it should cool to the approximate viscosity of grenadine. I put mine in an oil/vinegar dispenser.
I will try to scale this up to larger quantities, and post results.
Wednesday, March 2, 2011
Monday, February 21, 2011
Skittle Syrup Preparations
I'm going to be preparing Skittles syrup from the candies as soon as my equipment arrives this week. I'll keep a log of my methods both to serve as material upon which I can improve, and for the community at large. Any suggestions are appreciated!
First, to outline what I'm doing:
1. Separate out 5 different flavors in mixing bowls
2. Add (#) of Skittles in (volume) of water in large or medium saucepan
3. Heat to boiling, stirring to completely dissolve Skittles. Allow to cool (how much?)
4. Add (volume) of mixture to separation funnel, leaving room for non-polar layer
5. Add (volume) of canola oil to mixture to serve as extraction layer, shaking into mixture
6. Place sep funnel on ring stand and let stand until layers form.
7. Drain aqueous layer to keep. Discard non-polar layer.
At this point, I will evaluate the mixture, probably putting it in the freezer for a few minutes, as the hydrogenated oils have a high melting point, and will solidify at low temps.
If I still see solids, I will try the above process again and reevaluate whether I want to add a physical filtering step. It shouldn't be necessary, though, as the oils should extract easily this way.
Thanks to those who gave previous suggestions! I decided to go with a pyrex sep funnel because I want to make large batches of this for friends and family. I could have MacGyvered a similar solution (Thanks Jen!) but I really wanted to be able to do this as quickly and accurately as possible and in quantity.
First, to outline what I'm doing:
1. Separate out 5 different flavors in mixing bowls
2. Add (#) of Skittles in (volume) of water in large or medium saucepan
3. Heat to boiling, stirring to completely dissolve Skittles. Allow to cool (how much?)
4. Add (volume) of mixture to separation funnel, leaving room for non-polar layer
5. Add (volume) of canola oil to mixture to serve as extraction layer, shaking into mixture
6. Place sep funnel on ring stand and let stand until layers form.
7. Drain aqueous layer to keep. Discard non-polar layer.
At this point, I will evaluate the mixture, probably putting it in the freezer for a few minutes, as the hydrogenated oils have a high melting point, and will solidify at low temps.
If I still see solids, I will try the above process again and reevaluate whether I want to add a physical filtering step. It shouldn't be necessary, though, as the oils should extract easily this way.
Thanks to those who gave previous suggestions! I decided to go with a pyrex sep funnel because I want to make large batches of this for friends and family. I could have MacGyvered a similar solution (Thanks Jen!) but I really wanted to be able to do this as quickly and accurately as possible and in quantity.
Subscribe to:
Posts (Atom)